Introduction: Recycled Baby Bib

By www.iluvmojo.com
This is a fun, and easy project. Makes a great baby shower gift! :D

You'll need:
  • Bib to make a template.
  • Food Wrapper Of Some Kind.
  • Flannel Or Fleece
  • Scissors
  • Clear Vinyl
  • Thread
  • Velcro

Step 1: Make a Template.

Trace your bib out onto a piece of paper or cardboard to make a template and cut it out.

Step 2: Wrapper

Put the template on top of your wrapper to make sure it's the going to work. You can make just about any wrapper work by cutting and taping it back together in the right shape.

Step 3: Fabric and Vinyl

When you have your wrapper all ready to go, put it on top of your fabric wrong side to wrong side and then put the piece of clear vinyl on top.

Step 4: Cut It Out.

Pin the template in place on top and cut around it.

Step 5: Sew It Up.

Remove the template and sew around the edge of the bib. This part can be a little tricky so go slow and make sure you sew through all three layers.

Step 6: All Done!

Trim the edge to make it neat, then add some velcro and you're all set! :D