Introduction: Recycled Bottle-Milk Wallet

Well, in the first place, I want to say you I'm really sorry for my English, it's not my mother tongue so I will try to use proper language, but I certainly will do mistake.

So I want to learn you how to make a nice and cheap wallet in five minutes and with absolutly nothing.
Personnaly I like to make it when I hitchhike, or when I travel, it's nice to offer at people you met when you are on the way and who help you for something.

You can also make it with children because its absoloutly not dangerous and pretty easy. So lets go for explaination!

PS : If somebody want to help me for a correction, it's could be great. Thank you!


J'aimerais vous apprendre comment faire a joli porte monnaie en cinq minutes avec absolument rien.
Personellement, j'aime bien en faire quand je fais du stop, ou quand je voyage, c'est bien pour offrir au gens que vous rencontrez quand vous �tes sur la route et qui vous aides.

Vous pouvez aussi le faire avec des enfants, ce n'est absolument pas dangereux, et c'est tres facile.
Alors c'est partit pour les explications!

Step 1: What You Need

1 recycled tetrapack / milk bottle
Scisor/cutter
Tape or stapler
Button
Thread
Needle
rope


1 tetrapack / bouteille de lait recyclée
ciseaux / cutter
scotch ou agrafeuse
bouton
fil
aiguille
corde

Step 2: Flat the Bottle

First you have to make flat the bottle, pick up all the corners of your bottle and press it.

Now cut the head and feets of your bottle and you have to fold the two little side of the bottle beetween the two large side. Marked with the folds.

It's probably little bit confuse,
so a good picture is better than large speech.


Premierement vous devez applatir la bouteille, relever tout les coins et pressez la.

Maintenant coupez la tete et les pieds de la bouteille et vous devez plier les deux petits cot�s entre les deux grands cot�s. Marquez bien les plis

C'est probablement un peu confus, une bonne photos vos mieux qu'un long discour.

Step 3: Cut and Fold

Well ,now little bit more difficult, each third part of the bottle will be a face of your wallet, so you have to think about his design, if they are nice picture in the bottle you can keep it to be in the front.

So when you have make your choice, cut the third in the side opposite at the picture you want for the front.

Now you can fold in three parts, and use the tape or stapler to fix the middle part, this is the body of your wallet, and the nice picture is the front.


Bien, maintenant un peu plus compliqu�, chaque tiers de la bouteille vas etre une face de votre porte monnaie, vous devez donc penser a son design, si il y a une joli image sur la bouteille vous pouvez la garder pour etre sur le devant.

Quand vous avez fait votre choix, coupez le tiers sur la face oppos� a l'image que vous voulez sur le devant.

Maintenant vous pouvez pliez en trois parties et utilis� du scotch ou l'agrafeuse pour fixer le milieu, c'est le corps de votre porte monnaie, et la jolie image est le devant.

Step 4: Some Details for Make It Better

Now you can sew a button on the flap, and fix it a piece of rope with a pearl at the end to close it.

So that was how have a nice style in five minutes with your home-made recycled bottle-milk wallet.



Maintenant vous pouvez coudre un bouton sur le rabat, et y fixer un bout de corde avec une perle a la fin pour le fermer votre porte-monnaie.

Voila, c'etait comment avoir la classe en cinq minutes avec votre porte monnaie en bouteille de lait recyclee.

Pocket-Sized Contest

Participated in the
Pocket-Sized Contest