Print PDF
Favorite
Email
Step 3Sub-assemblies
Step2. Once the profiles have been cut out, glue each sub-assembly piece together. Elmer's glue works great! Use packing tape or drafting tape to hold the pieces together while they dry.
Step 3. Place the sub-assemblies on some scrap paper so that any glue that squeezes out in the next step will not dry your piece to the desk!
Step 4. Make a paper book sandwich. After gluing the assemblies and while they're still wet, sandwich the sub-assemblies between two pieces of paper and place a heavy book on top to gentle squeeze the pieces together. Let the sub-assemblies dry overnight.
Step 3. Place the sub-assemblies on some scrap paper so that any glue that squeezes out in the next step will not dry your piece to the desk!
Step 4. Make a paper book sandwich. After gluing the assemblies and while they're still wet, sandwich the sub-assemblies between two pieces of paper and place a heavy book on top to gentle squeeze the pieces together. Let the sub-assemblies dry overnight.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
