Print PDF
Favorite
Email
Step 2Hole punching
Clip the paper to the cutting board, then draw a line half an inch in from the left margin.
Along this line, mark off every half an inch. Once this is done, get our your tack and push it in on these tick marks. Be sure it goes all the way through.
Heads up: by attempting to punch holes in a lot of paper at once, you will make it fairly difficult. I reccomend you do one of two things. Either get a hammer and drive the tack through the paper (but not into the board! Be careful!) or do multiple groups of smaller amount of paper.
Along this line, mark off every half an inch. Once this is done, get our your tack and push it in on these tick marks. Be sure it goes all the way through.
Heads up: by attempting to punch holes in a lot of paper at once, you will make it fairly difficult. I reccomend you do one of two things. Either get a hammer and drive the tack through the paper (but not into the board! Be careful!) or do multiple groups of smaller amount of paper.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
