Introduction: Recycled IPod Sleeve
Last year I got an iPod. But I still was looking for something I could carry my iPod and headphones without having to buy anything. Well I've finally found it. Here is a case made from old worn out pants. That took a grand total of about an hour to make. Well here goes...
Step 1: �What You'll Need
Sewing machine (not pictured)
Step 2: Cut Out Back Pocket
A fairly simple step it doesn't have to be perfect so don't sweat it if you accidentally cut of the trim.
Step 3: Cut Off the Trim
Cut off the outside trim. But not the part I mentioned on the picture below.
Step 4: Cut Off the Ends
Cut off from about one half inch from the iPod. Now cut off the trim.
Step 5: Fold and Sew
First the fabric in half. Then sew to the correct dimensions of your iPod.
Step 6: Sew Across the End
Position the seam in the middle. Then sew across the correct line depending on your iPod length.
Step 7: Cut Off the Extra
Cut off the excess fabric.
Step 8: Turn It Out
Turn it inside out.
Step 9: Congratulations!
Now you can carry your iPod and headphones in style. Thanks for reading! =D
We have a be nice policy.
Please be positive and constructive.