With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
This project is to create a bucket low profile seat for as cheap as possible, we built this for 15euro and lots of scraps. What you need for ...
Take the pallet take the first layout off from pallet. What we did was put 3/4 of the way threw the wood so that we could bend the ...
We had some small bits of wood left over from another project we where able to put lats up agains the wood and draw out shape to sides ...
To add the lats just set up your two curvs side by side then take the curved wood and keep adding them from bottom to top, we screwed ...
To add the foam we used a layered effect to allow bucket seat to slope inwards to to the center. To add the foam on bottom layers you ...
Over all really happy with it very very comfy and well worth the 15 euro.
Pallet garden loungersby shoestringpavilion
DIY Pallet Benchby makerandco
Back Deck Pallet Chairby khohman
Retro-Fitting Power Seats into a Crown Victoria P71by nicholasw
How To Build An Outhouse From Palletsby nhampto9
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.