Print PDF
Favorite
Email
Step 4Figure out which leads we need to attach to.
Now you could do this step with a multimeter, but since this is really simple a piece of wire will do the trick just fine.
Using a piece of soldering wire touch the leads on the sides of the button to each other to figure out which 2 need to connect to light up the LED and trigger the IR emitter.
Using a piece of soldering wire touch the leads on the sides of the button to each other to figure out which 2 need to connect to light up the LED and trigger the IR emitter.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
