Print PDF
Favorite
Email
Step 4Put It All Together
Next, attach your reflector to the emitter-paint roller assembly with rivets and/or wire wherever you feel appropriate. Be sure to cut a space for the cords from emitter to ac cord to fit.
You can also use this step to help better secure your emitter. I did this by providing upward pressure onto the emitter via a side piece with a hole through which the paint roller fits and downward pressure via the wires running through reflector base and over top of paint roller. Basically, just play around with it until you're happy with the result!
You can also use this step to help better secure your emitter. I did this by providing upward pressure onto the emitter via a side piece with a hole through which the paint roller fits and downward pressure via the wires running through reflector base and over top of paint roller. Basically, just play around with it until you're happy with the result!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
