Print PDF
Favorite
Email
Step 8Installing the bars with RTV and installing the air filter and the cover.
I used Permatex Red Hy-temp RTV silicone gasket maker but any RTV silicone would work.
I put the RTV down one side with the air filter in place then put the cover in place and tightened the 1/4"-20 stove bolts just snug, this held the bar in place while the RTV dried.
I did the same to the other side and then went right on to the next step as the silicone will harden even if you get it into the car and running down the road before it hardens.
WOW it's fixed.
Now lets put it back in the car.
I put the RTV down one side with the air filter in place then put the cover in place and tightened the 1/4"-20 stove bolts just snug, this held the bar in place while the RTV dried.
I did the same to the other side and then went right on to the next step as the silicone will harden even if you get it into the car and running down the road before it hardens.
WOW it's fixed.
Now lets put it back in the car.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
