Print PDF
Favorite
Email
Step 10Reconnect Backplate
The backplate has four connections that need to be restored: Power connectors for the speaker and the LCD, ribbons for the LCD and rear controls.
I found it easiest to connect the power connectors first as shown, then rest the camera lens down to put the ribbons in place. The fasteners on both sockets slide.
Now you can put the backplate in place and prepare to seal the camera back up.
I found it easiest to connect the power connectors first as shown, then rest the camera lens down to put the ribbons in place. The fasteners on both sockets slide.
Now you can put the backplate in place and prepare to seal the camera back up.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
