Print PDF
Favorite
Email
Step 3Find the Right Size of Cable Ties
The head of the cable ties must have the proper width to snap into the socket, and be easily released.
To test, insert the head into the socket as shown in the first picture below. It should snap.
Then gently pull the cable tie. You should feel some resistance.
I measured a head width of 4.3mm.
To test, insert the head into the socket as shown in the first picture below. It should snap.
Then gently pull the cable tie. You should feel some resistance.
I measured a head width of 4.3mm.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jan 20, 2011. 2:45 PMneivadan
says:
i am glad that you put the measurments or ive would of been scratching my head all day long
Reply
 |
Add Comment
|
