Introduction: Repair Cracking Car Speaker

Picture of Repair Cracking Car Speaker

Materials :

KrazyGlue from the dollar store

Hot Glue gun

Rubber gloves for handling KrazyGlue

Step 1: Take Them Out of Your Car

Picture of Take Them Out of Your Car

Mine were not the original car speakers, they were reused radio speakers.

Step 2: Put Some Crazy Glue

Picture of Put Some Crazy Glue

put some crazy glue under the center part by little sections and hold your fingers on and under the 2 parts for 30 seconds with ventilation for it to stick well. It won't look perfect once you're done, witch doesn't matters.

Step 3: Put Some Hot Glue

Picture of Put Some Hot Glue

Put some hot glue in every little holes and then all around for isolation and to stop the speaker from making a cracking sound. And you're done. The speaker works like a charm now :) !

Step 4: Final Test

Picture of Final Test

Overall it works fine but it takes away a bit of the subwoofing part, but doesnt really matter cause the left speaker compensate for it.


About This Instructable




More by WYN soldier:Stream music in CSGOArduino Coffee Machine Repair cracking car speaker
Add instructable to: