Introduction: Repair Threads With a Home Made Tap

Picture of Repair Threads With a Home Made Tap

A tap is a tool for either making threads in a hole, or repairing threads. Use a triangular file to cut the grooves in any sized bolt. When repairing threads with this tool, use light oil, and remove the metal shavings. The bolt can later be used to reassemble the machine.

Comments

3366carlos (author)2013-03-18

nice

james123cb (author)2012-05-29

Nice and simple! I'll remember this one!

About This Instructable

6,250views

21favorites

License:

Bio: I am the author of "The Art of Fixing Things," www.theartoffixingthings.com
More by Fixit guy:How to tighten things.Make a tap from a boltGet your hardware in order.
Add instructable to: