loading
I had a solar charger, but then it broke so I stripped down the parts. I had two solar panels but the wires were stripped off. I used some extra wire and I soldered them to the panel

Step 1: Gather Materials

Solar panel (Obviously one that

Step 2: Soldering

Solder the positive wire end to the positive notch on the panel. Do the same with the negative wire. Then put electrical tape over the soldered ends. There you are done!

About This Instructable

713views

6favorites

License:

More by JCG5:Multimeter Holder The Solar Cart Generator Mobile Charging For Laptop, Tablet, And Phones. 
Add instructable to: