Print PDF
Favorite
Email
Step 7Semi-cleaned circuitboard
And here's what the board looked like after I scraped off the corrosion. It looks like I might have damaged by overheating while trying to remove the solder, too. Beyond hope? If I cleaned it would it still work?
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Oct 26, 2008. 5:23 AMwizrd4824
says:
Never scrape a board. Use isopropyl alcohol and a small brush (medium bristles). The foreign debris and corrosion should come off.
Reply
 |
Add Comment
|
