Print PDF
Favorite
Email
Step 11Reassemble
You can check the continuity with multimeter. In my case, it was difficult to place the probe into the jack. Then follow the diagrams and screw back the screws.
Before placing endoskeleton, you need to clean remaining thermal compound from CPU heat sink with 90% Isopropanol and add new drop of thermal compound.
Reassemble the rest of laptop computer. Make sure all the cables and connectors are placed back. It is arduous to open it again and reconnect.
Before placing endoskeleton, you need to clean remaining thermal compound from CPU heat sink with 90% Isopropanol and add new drop of thermal compound.
Reassemble the rest of laptop computer. Make sure all the cables and connectors are placed back. It is arduous to open it again and reconnect.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
