With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This explains how to replace the lock on a Givi hard motorcycle top/side case. The specific model shown is an E55 Maxia 3 with the tail light kit inst...
You'll need a new lock. The kit comes with a pair of keys, a new lock cylinder, a surround (housing for the lock) and a circlip. You'll need a Philli...
If you have the tail light kit installed, you'll need to remove the plastic insert that holds the contacts on. You'll need to remove two screws with a...
There are four Phillips screws holding the locking assembly on. Unscrew them.
It should just pop out of the case, now that you've removed the screws.
Remove the circlip from the back of the old lock cylinder. The latch should now be removable. There's a ball bearing behind the latch. It'll probably ...
Slide the new surround and lock cylinder into place from the front of the lock.
Be sure to put the ball bearing back into place. Make sure the lock is in the open position and replace the latch in the open position. Or make sure ...
You should be able to open and close the lock. The press to open button should release the catches at the top of the lock (that would hold the lid of ...
Put the locking assembly back into place, adjusting the gasket as necessary. Make sure the release button hasn't fallen out and slid under your workbe...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »