With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
I own a Rocking Horse made by Today’s Kids. This was a hand me down to my kid from an older cousin, so it is about 7 years ...
Heavy Duty 32” Bungee Cord My hardware store sells this by the foot, but they were out of stock so I just took a pre-made one apart. Hog ...
If I had bought bare cord, I would not have needed to perform this step. I needed bare bungee cord, so I had to remove the metal hooks ...
I made a loop at the end of the cord using the last 5” of cord. Then I secured it using the hog ring. I had to squeeze ...
I removed the yellow end pieces from each foot peg (there are screws holding them in place). Then, the rubber band easily slid off the peg. After the ...
I stretched the loop of one end of my custom cord over the yellow end piece on the horse side. Then I looped the cord over the opposite ...
Originally, I only wanted to replace 1 broken band. But in testing my repair, I put as much weight on the horse as I could to see if ...
Retrofitting a Retro Rocking Horseby vanweb
Photographing Horsesby Stormieqh
3D Printed Toy Horse Ornamentby EricS6
Rocking Horseby blanky5452
Renew Old Children's Toysby jeff-o
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »