Introduction: Replacing Radiator Mounts.

Picture of Replacing Radiator Mounts.

The 17 year old rubber mounts for the radiator in my Honda civic 1999 are overdue for replacement. Here is how I performed this job.

Step 1: Removing the Upper Bracket and Bottom Mounts.

Picture of Removing the Upper Bracket and Bottom Mounts.

A 10mm bolt holds the upper bracket and it has a single rubber mount. There are 2 bottom mounts that needed to be pried off due to the adhesion of the rubber to the radiator over time.

Step 2: Comparison of Mounts.

Picture of Comparison of Mounts.

See how busted up the oem mounts look? The new ones are ready for installation!

Step 3: Installing the New Mounts.

Picture of Installing the New Mounts.

The old upper mount rubber needed to be pried out. The new one was popped in and the 2 bottom ones easily installed.

Now the radiator has new mounts and ready for service!

Comments

About This Instructable

248views

0favorites

License:

Bio: As of April 2017 I have decided to no longer post on instructables. The fact that several of my published works have been removed without ... More »
More by Mjtrinihobby:External Light Sensor Night Light.Replacing a Toilet Tank Float Valve. How to Make Pig Feet Souse!
Add instructable to: