Print PDF
Favorite
Email
Step 3Cut the new wiper blade to size
Using the old headlight wiper blade as a guide, cut the new blade to the correct size. This can be done easily with either a pair of wire cutters or a razor blade.
Next, cut the stainless steel strips that were pulled from the new wiper to be the same size. I did this by scoring it using a cutting disc on a Dremel tool and bending it (which actually made a very clean, straight break).
Next, cut the stainless steel strips that were pulled from the new wiper to be the same size. I did this by scoring it using a cutting disc on a Dremel tool and bending it (which actually made a very clean, straight break).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
