With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is my wife's plastic watering can. The original sprinkler head cracked and fell off. I replaced it with standard PVC parts from the local hardw...
The red numbers identify each part. Number 1 is a 1/2 inch male adapter. Number 2 is 2 x 1/2 inch bushing. Number 3 is a 2 inch slip cap. The slip...
I intended to make photos of each step, but became so engrossed in the mechanics of making my sprinkler head work that I forgot to take the pictures. ...
Drill about 20 holes 1/16 inch in diameter in the slip cap. Spread them out evenly. (Check each hole and clean away any burrs that restrict water fl...
Here you can see how the head makes a gentle shower of water streams. For test purposes I am pouring water into the kitchen sink.
The inside of the bushing holds some water. (I added coloring to the retained water so it is more easily seen in this photo.) Even more water is ret...
Remove these ads by
Signing Up
Not NiceInappropriateSpam3,444 views
7 favorites
Posted:
Jun 9, 2010
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »