Instructables
Picture of Resole Shoes
The easy way to resole shoes. It takes about 20 minutes.
Your shoes will be more comfortable than when they were new.
What a great way to start the new year!

I'll demonstrate by resoling a pair of Crocs using contact cement and foam from interlocking floormats.

WARNING:
Until you add tread, the new soles are almost as slippery on wet pavement as the worn-smooth crocs were.

Step 1: Flatten Your Soles

Picture of Flatten Your Soles
We'll be gluing a half inch or so of foam onto the bottom of each shoe.
You might want to grind your soles flat with a beltsander or disk sander with the coarsest grit you can find. Instead of flat you could go nuts with amateur orthopedic theories.

My Crocs have worn down pretty flat so I'm going to skip the grinding.

Step 2: Trace onto Sole Material

Picture of Trace onto Sole Material
You can trace pretty tight, you'll be cutting around this line.

Step 3: Cut out the Soles

Picture of Cut out the Soles
Cut out the sole with a sharp knife or the tool of your choice.
Leave a bit extra around the edges.
An electric turkey knife is good for cutting soft foam.
This foam is about the same density as the croc foam.

Step 5: Apply Glue

Picture of Apply Glue
I leave the brush in the can so it lasts forever. I cut the brush handle short so it'll fit.
Paint it on the mating surfaces of the new and old shoes.
If it's glossy at first that's enough. If it runs that's too much.

DON'T PUT THEM TOGETHER YET. WAIT FOR IT TO DRY FIRST!
That's what the directions say, and that's how this stuff works.
If you stick them together wet they'll come apart later and pick up dirt etc.
When it has a matte look to it that's enough.
For a super strong joint I'll drive off all the naptha using ninja tricks before mating them.
 
Remove these adsRemove these ads by Signing Up
darrenhall1 year ago
Cool instructable and I bet they even hold up ok in the wet with that glue - - big respect.
hikerdw1 year ago
Nice work. Thanks for posting such a useful set of instructions. It has given me an idea on how to install a very grippy sole to my hiking boots for a one-time scramble up Longs Peak this summer.
think something like this might work for replacement insoles?
dundalei3 years ago
mikeasaurus6 years ago
you resoled $5 shoes?
TimAnderson (author)  mikeasaurus6 years ago
what's the source for $5 crocs? These were $10 clones I bought in Oaxaca. I saw them for $6 in Guatemala, but couldn't find my size.
I was at a big lots today in Santa Clarita, California and they had fake crocs in all sizes for 6 dollars. Even better, they had legitmate brand name ones for 10 dollars.
callmeshane6 years ago
A useful thing.... I with my HUGE feet... 12EEE (WIDE and long) well getting any shoes that fit is a major trauma. So I decided to resole my boots... I applied a nice thick layer of silicon "glass" type rubber / sealer over them...... Bad move. INSIDIOUSLY slippery on any even slightly wet surfaces....
thats nothing, I am only 13 and my feet are already a size 13. My dad wears size 16s
My dad wears an 11 1/2. I'm 14, and wear a 13. Lol.
my friend is 12 and he wears 14! lol!
Robot Lover4 years ago
are you resoling crocks?! lol!
Will contact cement work on vulcanized rubber?
TimAnderson (author)  masterochicken4 years ago
yes. It works on most things that aren't oily.
uncoolpizza4 years ago
hey nice job, thanks for posting this!
good tip about melting tread in with an iron. i tried doing that on a very very slippery pair of sandals by cutting in with linoleum carving tools. it works but should work better, i think i'll try melting in next- maybe with a soldering iron?
Great Instructable, I was just thinking of using road alligator (Truck Tire Tread) for a sole. I still may but will look into the rubber tile too. Thanx
dglp6 years ago
1) where does one get interlocking floor tile? 2) You're walking a bit taller now.
You can find it at Home Depot and Lowes, you can also find it in more colors as a play mat for kids and places like Wal-Mart, Toys R Us, and Target. I'm sure there are other places as well.
higherlife6 years ago
I love it. I have tried this before except the opposite using soles and remaking the top part. I have used them for about a year and they hold up well.
eriklares6 years ago
broken in shoes with new soles!! man, thats a dream come true, i gotta try this with an old pair of vans.
missmonny6 years ago
Fantastic. Who would have thought to use floormats. You did a really good job. My crocs are still in one piece but now I know what to do when they aren't!!
i have been wondering how to do this for a while, and what to use as the sole. rubber interlocking floormats, looks definately the way to go on this!! great tip! im going to get to work on my torn apart mocasins!!!
leebryuk6 years ago
I think this is cool. I have had to throw many a pair of shoes away thanks to gigantic feet. It was hard finding size 15 shoes, but it's much easier now. And it's a great way to re-use something that would end up clogging up a landfill. Don't let the man get you!
xrobevansx6 years ago
not to be a stickler, but how about some "finished" shots of the shoes? Nice Instructable!
keng xrobevansx6 years ago
that's it in step 9.
xrobevansx keng6 years ago
I meant a few different angles and such.
What the heck! At first me and my cousins were looking at step 7 like what the heck is this??? We were laughing for years and eternities, and we are still laughing. On our grave stones they will say, "I am still laughing." Hahaha just kidding. Great Instructable. :-)