Introduction: Retro Gaming Console, Rpi, 3d Printed.

My project is a retro console , I also have access to a 3D printer and make my case for this little toy.
Here, the impression of the case

http://www.sendbox.fr/8cc31da3fcf1e8a2/Retro_gaming_console,_Rpi,_3d_printed..zip

Step 1: Material

Gather materials:

To set up a Recalbox, you need the following:

A Raspberry Pi 2 (I took the Starter kit with Wifi) A micro SD card with at least 16GB An HDMI cable A Bluetooth key A joystick PS3, XBOX360 (wireless and that's the one I chose) or a USB joystick. A Wired USB keyboard or wireless keyboard software:

Recalbox SD Card Formatter - MAC or WINDOWS Once you have gathered all these components, you can proceed to Step 2 and install recalboxOS on your SD card.

Step 2: For Finish

Visit https://github.com/digitalLumberjack/recalbox-os/... to download the latest version of recalboxOS. You can install recalboxOS on a FAT32 formatted card. For this, use the formatting software available at https://www.sdcard.org/downloads/formatter_4/ Windows and MacOSX, Linux or gparted, remember to select "full erase" to erase the map data otherwise it does not work.

Unzip the file recalboxOS.zip and copy all the files in the base of your SD card.

Insert the micro SD in raspberry, connect the HDMI, keyboard and power supply. Your raspberry load the installer, select recalboxOS with SPACE and install with I.

You now have a recalbox!

Comments