Print PDF
Favorite
Email
Step 5Extending Control Switches part-2
Once the switch extensions seemed to work, it was time to extend all the controls I wished to use. Upon looking at the PCB layout carefully, I noticed that all the surface-mount control switches terminated to a common bus that I'm guessing was Ground? In any case, this meant that I only had to extend one wire per switch, and one Ground wire, thus saving a bunch of time!
I was a little low on hookup wire, but overstocked on ethernet cable now that Wi-Fi is all the rage . . . if it's good enough to zip the internet to me, it's good enough to press "Play."
I was a little low on hookup wire, but overstocked on ethernet cable now that Wi-Fi is all the rage . . . if it's good enough to zip the internet to me, it's good enough to press "Play."
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
