Print PDF
Favorite
Email
Step 6Mounting Display Bezel
I thought the best place to mount the display panel would be where the original mono-speaker was located.
The first thing to do here was fill in the hole where the speaker was something a little more substantial . . . like 1/4" MDF/fiberboard. Once the MDF cutout fit in the speaker hole perfectly, I cut out an additional rectangle in it for the original Sony display bezel. The old-school speaker fabric can then be cut with an xacto and carefully folded back inside of the bezel cutout (see picture).
Once everything fits snugly, quick! epoxy it all together before something happens! Preferably 5-minute epoxy if you're like me and have a short attention span.
The first thing to do here was fill in the hole where the speaker was something a little more substantial . . . like 1/4" MDF/fiberboard. Once the MDF cutout fit in the speaker hole perfectly, I cut out an additional rectangle in it for the original Sony display bezel. The old-school speaker fabric can then be cut with an xacto and carefully folded back inside of the bezel cutout (see picture).
Once everything fits snugly, quick! epoxy it all together before something happens! Preferably 5-minute epoxy if you're like me and have a short attention span.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
