Instructables

Retro Pixel Battenburg Cake

Featured

Step 9: Assemble the Cake

Picture of Assemble the Cake
PICT3756.JPG
PICT3758.JPG
PICT3759.JPG
PICT3760.JPG
We are ready to start assembling the cake!

Before you start, double-check that you have enough of each color to fully construct the design. You will have some problems if you don't.

Brush a thin layer of the jam over the marzipan and lay the first layer of the design. Brush some more jam between each piece.

Brush jam over the top of the first layer and continue to add each layer until the design is complete.

Once done, carefully wrap the marzipan over the top of the cake and connect the 2 ends with a small brush of jam and a little pressure.
 
Remove these adsRemove these ads by Signing Up