Print PDF
Favorite
Email
Step 5Plan Your Array
Figure out how to form a Triangle-like figure (or square or pentagon...) using the LEDs
Then, draw the outline of the base using the Marker ,
And at Last but not at least cut the board trying to adopt the shape of the base as much as you can ,
When done , Dry fit the board and the LEDs
It is pretty Straight-forward , you may also use the pictures as reference
Then, draw the outline of the base using the Marker ,
And at Last but not at least cut the board trying to adopt the shape of the base as much as you can ,
When done , Dry fit the board and the LEDs
It is pretty Straight-forward , you may also use the pictures as reference
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
