Print PDF
Favorite
Email
Light bulbs can be recycled in many forms and uses, although is not a new idea, check this site about reusing light bulb for chemical glassware testers , pretty cool, and here's another one using the same idea for a hanging vase and for salt and peeper containers (in french), it can be an excellent gift for Valentines (if you are in to that) or for any other day of the year. Finally back in my country in small town fairs they still use them as targets for shooting with airguns, which is better than just toss them in the trash I guess.
Hollowing the light bulb:
There are several instructables that had covered this already, although I first saw it in this site: DIY Hollow Out A Light Bulb, a very good step by step instructions in how to gutted out the bulb, (and also how to used for tester vessels for boil water and some other uses).
Here is another instructable about "How to hollow out a lightbulb and make a stand for it, pretty neat too.
and here a bunch of instructables more about light bulb uses an related stuff. Enjoy
Hollowing the light bulb:
There are several instructables that had covered this already, although I first saw it in this site: DIY Hollow Out A Light Bulb, a very good step by step instructions in how to gutted out the bulb, (and also how to used for tester vessels for boil water and some other uses).
Here is another instructable about "How to hollow out a lightbulb and make a stand for it, pretty neat too.
and here a bunch of instructables more about light bulb uses an related stuff. Enjoy
Thanks a lot :)
.
http://images.orkut.com/orkut/photos/OgAAAOIRAhcBHVEaX9zY88VmVnyLC43WnZQ1zeDh9wxvIJHkm5J8siPSX2iP-53Tmt3bnlftx0ebUPehacv8OuNL8HUAm1T1UE4we6ijrsD4rk3j2lWmy8R7AoSq.jpg
.
http://images.orkut.com/orkut/photos/OgAAAAIsGO_Y-3csXtk0Fs8XQJec5cjq8Rmgr8UJBEU5A3cVmVm-3uJs7B6Lausp8p97k2PzRT1UQNKKiNpl_pGkqv0Am1T1UNcfibeOfb8xEdFrf-MTAb4XrAkQ.jpg
.
Thanks for the idea!!!
Hugs from Brazil.
Obrigado!
lol anyway good ideas!
A Instructable showing how to grow these glowing algae can be found here: http://www.instructables.com/id/Grow-Your-Own-Bioluminescent-Algae/
There are a few different kinds, some that give off glowing flashes when disturbed (can react to sound). Some species give off a constant glow.
I would be very interested in hearing about anybody that has maybe tried this? if nobody has i will probably combine these two projects since i wanted to do them both anyways.
Maybe I'll post an ible with instructions and my result.
It's just that around here, if I simply lay those lightbulbs on aluminium rings from hard drive they are very prone to be hit and thus very prone to be destroyed. OK, my suggestion doesn't totally guarantee that it won't be destroyed accidentally (perhaps I should switch to a safer environment ...).
Many of our coins are ferromagnetic, in fact my portable change holder is just a chunk of neodynium. The only thing that doesn't stick is 5 cents.
So yea, be canadian for it to work :D
Or go get some canadian quarter!
(You get the idea.)
Now as a side note, this seems like a great little project and I'm a big fan of recycling during crafts. Now I just need to wait for one of my bulbs to go. Unfortunately I'm systematically replacing all the bulbs in my house with the energysaving kind. I've yet to find a craft that reuses them when they go. :-P
Thank you!
Just rub the letters with an expo white board marker until the letters dissappear, then simply rub the marker off with your fingers. I found this out by accident when I was in 4th grade and have been using expo markers to remove unwanted marks from all sorts of things.
Follow first the instructions in how to open the bulb.
You must clean the inside of the bulb (usually bulbs had a white powder inside) be careful when you open, clean it with water and dry it with a paper towel.
For the terrarium I just used sand and/or planting soil for the base, drop a little inside of the bulb in a horizontal position, no to much (1/4" or so), since the moss has a layer of soil itself, and it needs to be a little moist so it wont move.
I found the moss in my backyard, pretty easy, look for dark or humid places around the backyard or if you go for a hike to the any park, it will be easy to find some different kinds of moss, just be respectful of the environment.
To put the moss inside the bulb split little pieces of the the moss "carpet" , small enough to fit the opening, I use a pair of tweezers and also chop sticks to set the pieces in place.
Keep it humid after finishing and I think, depending of the conditions, you might need to water once a week just a tiny bit of water, you will see some condensation inside the bulb, which is normal.
I use a ring (from a discarded hard drive) as base, be creative and resourceful.
I hope it helps, and good luck.
The Earth itself can be seen as a sealed biosphere (a rather large one).
By the way, I am not sure but .. isn't this cycle reversed at night? At night, doesn't the plant consume carbon oxyde and release oxygen?