Step 4: The BOX
The FABLAB in Gent, where the JAM SESSION took place, has excellent facilities for such prototyping work.
The design was made with BoxMaker ref: http://boxmaker.rahulbotics.com/ and further adapted to include all holes and cutouts.
After format conversion for the laser cutter, it was cut out of a 4mm MDF board.
Bottom and sides were glued together. The lid fits snugly on top, allowing to change batteries.
The design was made with BoxMaker ref: http://boxmaker.rahulbotics.com/ and further adapted to include all holes and cutouts.
After format conversion for the laser cutter, it was cut out of a 4mm MDF board.
Bottom and sides were glued together. The lid fits snugly on top, allowing to change batteries.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
