Print PDF
Favorite
Email
Step 6Putting it together
The construction of the fleece shoe is the same as the lining. Once you have four shoes; two linings and two fleeces, pair them up so that you have two fleece-lining pairs. Left shoes with left, right shoes with right.
Take one pair. Put one part inside the other, making sure that right sides are together. This means that you can see the seams. Line up the seam at the heel, then pin the opening together. Sew along, leaving a 10cm gap. Turn the shoe inside out through this gap.
Tuck the ends into the gap again and slip stitch the gap close. Done!
...Or not. Repeat with the other shoe. NOW you're done :D
Take one pair. Put one part inside the other, making sure that right sides are together. This means that you can see the seams. Line up the seam at the heel, then pin the opening together. Sew along, leaving a 10cm gap. Turn the shoe inside out through this gap.
Tuck the ends into the gap again and slip stitch the gap close. Done!
...Or not. Repeat with the other shoe. NOW you're done :D
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
