With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here is one way to inexpensively bring a shredder into your home office! I always wanted to get a shredder to dispose of sensitive documents, so when...
First thing to do is to find the hidden screws under the feet. The feet are the foamy adhesive type and are hard to remove without trashing them. Had ...
In my case, I had no clue as to what was broken, so I just removed the circuit board and cut the wires as close to the board as possible, in order to ...
Ok, so now I know that I need a bridge rectifier, but what is it exactly? Well, it is usually an arrangement of 4 diodes that will act like traffic co...
Now that we have DC, we need to be able to get the power to the motor, to be able to turn it on and off, and be able to reverse the motor in case of j...
So, I went with the "Mount stuff first, wire later" approach. I simply reused the holes for the power and directional buttons, for the same funtions.....
Since there is only 4 components in this circuit, we just need to find out how to solder wires between the components. Forget about circuit boards,thi...
Well, now that everything is soldered in place, you want to run this beast a few minutes to see if anything burns out... make sure that you run it in ...
Now that everything works, just tuck the wires in, close the lid, put the screws back in, and enjoy bringing doom to countless documents! There is al...
I have learned to easily identify rectifier bridges in circuits, and I now know that if one of those is present at the beginning of a circuit, it is t...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »