Instructables

Ro-Domo-kun Instructables Robot Domo-kun

Featured

Step 5: Rough out the shape, hem and haw

Picture of Rough out the shape, hem and haw
DSCF2164.JPG
DSCF2165.JPG
I used a serger for the major parts of the seams to join the front and back of the body piece together. Because the serger cuts as it goes along, there were some parts I couldn't do without cutting into places I still wanted attached.

Finish along the outside of the arms with a regular sewing machine.

Leave the bottom and inside pants seam open.

Trim the bottom and any excess from the arms.

Cut down the middle to separate the leg portions. Be careful you don't cut too deep.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!