Print PDF
Favorite
Email
Step 8Adding Tabs and Switch Belt
The next elements I will install are the power tabs and the switch hook.
Initially the elements are sewn on with the conductive thread and then finished off with standard thread to ensure the tabs/belt switch do not come off.
The belt is stitched at one side permanently with conductive and standard thread. The other "hooked side" remains free hanging.
Next sew the loop tab/wire on the other side of the switch circuit. This will allow the hook switch to be "hooked" up to complete the circuit.
Initially the elements are sewn on with the conductive thread and then finished off with standard thread to ensure the tabs/belt switch do not come off.
The belt is stitched at one side permanently with conductive and standard thread. The other "hooked side" remains free hanging.
Next sew the loop tab/wire on the other side of the switch circuit. This will allow the hook switch to be "hooked" up to complete the circuit.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
