Introduction: Road Roller

Picture of Road Roller

Maker name : Shivaraju. r
Location: Banjarapalya E4D Makerspace


  1. 2 Rubber band
  2. 2 water bottle cap
  3. candle(wax)
  4. broom stick
  5. skotch tape


  1. knife
  2. shorp Nile

Step 1: Take All Components Make Hole

Picture of Take  All Components Make Hole

Take the all component first . Then you need to take a watter bottle cap and make a hole both cap and it should be in center of the cap, accept candle also as shown in the image.

Step 2: Put the Rubber Band

Picture of Put the Rubber Band

Put the robber band inside the candle and water bottle cap as shown in the image.

Step 3: Fix Broom Stick

Picture of Fix Broom Stick

Ofter that fix the broom stick both end and scotch tape as sown in the image .

Step 4: Rotate the Model

Picture of Rotate the Model

Take the Roller model and rotate the broom stick with the help of your hands.

Step 5: Finally Project Is Done

Picture of Finally Project Is Done

Finally the Road Roller project is done.

Step 6:


shivaraju (author)2015-06-27

thanks bro

DIY Hacks and How Tos (author)2015-06-27

Nice mini toy car.

ThatMike1 (author)2015-06-28

I used to make these over 50 years ago using wooden spools from grandmother's sewing box. Alas, wooden spools are hard to find. Thank you for an updated version!

shivaraju (author)ThatMike12015-06-30

thanks bro

About This Instructable




More by shivaraju:Laptop cooling  padLow cost vegetable cutter DIY 50 cent Water Heater
Add instructable to: