Print PDF
Favorite
Email
Step 14Cutting the pumpkin for the motor space
For this step you will need a sharp knife.
Firstly lay your correx down on the pumpkin and trace around it (lay your correx so the wheel face away from the pumpkin, so when you install it the touch the ground and the motor switch faces down)
Note:you may need to cut the correx back to fit on your pumkin
Note: When you cut the bottom of your pumpkin out get lots of the inside out as well to save wieght.
Renember, this is on the bottom of you pumpkin!
Firstly lay your correx down on the pumpkin and trace around it (lay your correx so the wheel face away from the pumpkin, so when you install it the touch the ground and the motor switch faces down)
Note:you may need to cut the correx back to fit on your pumkin
Note: When you cut the bottom of your pumpkin out get lots of the inside out as well to save wieght.
Renember, this is on the bottom of you pumpkin!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
