Print PDF
Favorite
Email
Step 6Gears
For this step, you will need two green rods, 2 yellow or grey rod connectors and a small gear cog.
First connect the two green rods to the black rod connectors like shown in the picture. Then connect the yellow/grey rod connectors to the green rods like shown in the picture.
Finally slide the small gear cog on to the red rod you put there in step 5
First connect the two green rods to the black rod connectors like shown in the picture. Then connect the yellow/grey rod connectors to the green rods like shown in the picture.
Finally slide the small gear cog on to the red rod you put there in step 5
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
