Print PDF
Favorite
Email
Step 11Solder and Use Electrical Tape
Now you need to solder the last few connections you just made: the resistor to circuit, the resistor to battery, and the wire to each side of the switch. While the soldering iron is out and ready, make sure all of your previous connections are soldered firmly.
When this is done, use your electrical tape to cover anything sticking out or poking. This can include wires, joints, etc. Additionally, make sure you tape down the switch to the box so that it remains in one place.
When this is done, use your electrical tape to cover anything sticking out or poking. This can include wires, joints, etc. Additionally, make sure you tape down the switch to the box so that it remains in one place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
