Print PDF
Favorite
Email
Step 3Get bendy arm
Take apart your fluorescent desk lamp and remove the nifty bend arm.
Don't remove the lamp wire from inside the arm. You will need this to hook up your microphone. Therefore, don't trim it too close.
Leave the mounting bracket still attached at the bottom of the arm.
Don't remove the lamp wire from inside the arm. You will need this to hook up your microphone. Therefore, don't trim it too close.
Leave the mounting bracket still attached at the bottom of the arm.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
