Print PDF
Favorite
Email
Step 12Seal the Neck of the Guitar!
Electrical Tape is your friend. Also, it's totally Punk-Rock.
Use a tight wrap of electrical tape around the two ends of the Guitar Hero Button Unit, and attach it to the back of the Rock Band Guitar Neck.
Then cover over the gaps in the neck of the guitar with additional tape.
Since you've got the tape out, why not decorate? it will actually clean up the appearance.
Use a tight wrap of electrical tape around the two ends of the Guitar Hero Button Unit, and attach it to the back of the Rock Band Guitar Neck.
Then cover over the gaps in the neck of the guitar with additional tape.
Since you've got the tape out, why not decorate? it will actually clean up the appearance.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
5
Oct 3, 2008. 4:13 PMpeach_fart
says:
i would have made the flames wrap onto the frets & just cut the pieces so they wouldnt interfewe with the buttons preesing down & springing up.
Reply
2
Jul 18, 2008. 6:24 PMabadfart
says:
thats ok i'm 17 and i have man hands
Reply
 |
Add Comment
|
