Print PDF
Favorite
Email
Step 8Test Your Buttons!
Attach your rock Band Controller and start up Rock Band in Practice Mode.
This won't penalize you for not strumming.
Press some buttons on the exposed circuit boards. They should all be working appropriately.
If it doesn't work at all, check your ground.
If some work, then check the wire lines in the circuit boards, and make sure you did it right.
With sharp eyes, you should be able to figure out which button is right.
This won't penalize you for not strumming.
Press some buttons on the exposed circuit boards. They should all be working appropriately.
If it doesn't work at all, check your ground.
If some work, then check the wire lines in the circuit boards, and make sure you did it right.
With sharp eyes, you should be able to figure out which button is right.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
