C:\Documents and Settings\Ed Walker\My Documents\My Pictures\My instroctables\#1 011.jpg
This is my first instructable so it might not be that good.
This is a very simple rock shooter heres how to make it:

What you will need;
-A fairly long piece of cardboard tubing
-3 elastics
-A cork
-some thin cardboard
-string
-two paperclips
-tape
-Ammo!!!!!!!!!!!!!!!

WARING: DO DOT SHOOT AT ANY ANIMAL OR HUMAN MAY RESULT IN INJURY!!
 
Remove these adsRemove these ads by Signing Up

Step 1: Stringing the Elastics and Installing Them

C:\Documents and Settings\Ed Walker\My Documents\My Pictures\My instroctables\#1 001.jpg
C:\Documents and Settings\Ed Walker\My Documents\My Pictures\My instroctables\#1 002.jpg
C:\Documents and Settings\Ed Walker\My Documents\My Pictures\My instroctables\#1 003.jpg
To connect the elastics place one elastic over the other one (see picture) then pull the one on the bottom so it goes around the other one and then pulling it thru itself. It sounds hard but its really easy. Then attatch annother on to the chain with the same knot. Then cut one of the end elastics like in the second pic. after that tape it to the end of the tube like in the third pic.
evan_124 says: Apr 23, 2009. 10:32 PM
wanna go crazy with it? do as stated before and use pvc pipe and switch out the tiny rubber bands with some medical tubing or other higher quality stretchy stuff, got mine to go thru cardboard.... woopdee dooo i kno...
QwertyuioLP says: Jan 27, 2008. 11:08 PM
do ya hav 2 use cardboard? I use pipe What's with da cork?
Bartboy says: Jun 1, 2008. 9:04 AM
cardboard is much cheaper, and not everyone lives somewhere you can get pvc pipe
Zodiac58911 says: Nov 11, 2007. 7:15 AM
Wow, it is pretty cool. Here is a tip: When you do your next instructable, run it all through Microsoft Word, or some other word processing program, in order to spell check it and get the grammar right. Other than that, it is pretty good. :)
teh_pyroazn says: Jul 4, 2007. 8:51 AM
Mine is kinda like yours but simpler.
bob430 says: Jun 15, 2007. 11:36 AM
ok. i will when i make one.
bob430 says: Jun 13, 2007. 6:16 PM
cool! when i get some time, I'll make one!
Masta Moofasa (author) says: Jun 15, 2007. 9:20 AM
Let me know how well it works!!
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!