a scrap piece of wood (1/2")
0.98$ hinge from princess auto
key hole saw
drill and bits
FYI: when I started this project i didn't know about this wicked awesome website. If i would have known i would be giving step by step instructions I would have taken more pictures. But I think you can get the point from what I've got.
PS: I think the 'real' kickpedal/posterboard fix is wicked cool!
Step 1: Find a piece of wood (easy right?)
I lucked out big time when I found this scrap piece of cedar siding in a dumpster from a neighbor's reno project. Used a key hole saw to get a ruff outline of the pedal (jig saw would have worked much better). I just moved into my new place and don't have all the tool/resources I used to have back on the old man's farm. So... winter tires double as a work bench (just be careful with the saw).
Step 2: Sand it down
I found the hinge at princess auto (a surplus tool/random cool thing store) it had another side to it that i cut off with the dremel. All you really need is something that the pin (that the pedal pivots on) will fit through without too much play.