This is the assembly instructions for the Tiny Tank from Rocket Brand Studios. This is a great little robot kit, and can be purchased as a complete kit or as a rolling chassis, ready for the micro controller of your choice --Arudino Uno, Duemilanove and Nano, Picaxe 28 board, or Gadget Gangster Propeller Board. The Tiny Tank comes in lots of super-duper colors (and colours!) so be sure to stop by the website to see what is available.
Remove these ads by
Signing UpStep 1: Prepare
Alright there, Skippy --Unwrap everything and get ready to get going.
You will need:
Little screwdrivers
X-acto knife
Soldering iron and small solder
Now, lets go ahead and talk about the elephant in the room... The laser-cut acrylic has a distinctive smell. The good news is that most of that funky goodness is in the paper backing of the plexi and not the actual plexiglass. Unwrap all the pieces by peeling off the paper plastic and get it out of the house. The smell will go with it, I promise.
You will need:
Little screwdrivers
X-acto knife
Soldering iron and small solder
Now, lets go ahead and talk about the elephant in the room... The laser-cut acrylic has a distinctive smell. The good news is that most of that funky goodness is in the paper backing of the plexi and not the actual plexiglass. Unwrap all the pieces by peeling off the paper plastic and get it out of the house. The smell will go with it, I promise.
Flag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
