Print PDF
Favorite
Email
In this instructables, we will put together the optional Line Follow Board that can be used with the whole family of RocketBot Robots.
This board, when attached to your robot, can sense a black line on a white background (or vice-versa) and will allow your robot to follow lines and mazes. Lets begin.
If you have any issues, questions or comments, feel free to contact me directly:
Rocket Brand Studios Homepage
Rocket Brand Studios Line Follow Page (Tutorials and Test Code)
rocketbrand@gmail.com
You will need:
- Soldering iron
- Solder
- A pair of dykes (Diagonal cutters --little snippy things)
- Small Screwdrivers
- Masking Tape
Remove these ads by
Signing UpStep 1Lets Get Started
Ok, let's get started...
First off, this kit will require soldering and you shouldn't be intimidated by this. Soldering is an incredibly easy skill to learn and there are about 6 million tutorials out there. If you are unfamiliar with soldering, now might be a good time to hit the Googles or the YouTubes and find yourself a tutorial or walk-through. One particular tutorial I like is enclosed below:
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
