Instructables

Roller Coaster/Sports Glasses Case Holder

Picture of Roller Coaster/Sports Glasses Case Holder
051.JPG
 This is a glasses case holder that hooks to your belt loop to hold your glasses while you ride roller coasters. Its can fit in your pocket and will hopefully stop your glass from getting lost. 
Please vote for this in the paracord contest is you enjoyed it
www.instructables.com/contest/paracord/
 
Remove these adsRemove these ads by Signing Up

Step 1: What you need

Picture of What you need
 Materials:
Paracord or String
Glasses Case
Mini Climbers Clip
 
Tools:
Lighter
Drill
Drill Bit(The size of your cord) 

Step 2: Drill the Hole

Picture of Drill the Hole
 Open your case and drill a hole in the top of you case.

Step 3: Thread,Tie,Melt

Picture of Thread,Tie,Melt
020.JPG
027.JPG
029.JPG
 Thread the cord through the hole and tie a knot at the end. Now melt the cord at the knot to stop it from unraveling. Finally tie a knot on the outside of the case.

Tip: Wrap the end of the cord in tape before threading it

Step 4: Measure and add the Clip

Picture of Measure and add the Clip
038.JPG
040.JPG
 First put your case in your pocket and let the string hang out. Then put the clip on you belt loop. Measure the length to your clip and tie it off. Leave a little slack so it will be ablle to hook on different belt loops. Finally melt the knot on the clip.

Step 5: Your Done

Picture of Your Done
 Now where it to the amusment park and have fun.
ccremeans2 years ago
I am going to universal studios in a few weeks I will have to make this for sure
fjmontiel3 years ago
I used to have one wtih my folding kinfe, and wallet.
l8nite4 years ago
This is one of those "slap yourself in the forehead, why didn't I ever think of that kind of idea" this would be handy in a lot of situations...
imthatguy1125 (author)  l8nite4 years ago
 Thanks, it worked well and saved me I lot of money from the lockers yesterday.