Print PDF
Favorite
Email
Step 6Dry fit
Once your glue is dry/cool on the magnet mount, dry fit it into the cup, and make any cuts/trims to let it just slide in. I like it to be able to pop out, so that if something happens, the paper will seperate from the magnet mount, and hopefully the magnets stay attached to your car.
If you intend on using the cup holder/condom/anything else, now is a good time to try it on the cup and make any repairs/fixes. Mine had a open edge, and to prevent it catching wind, I hot glued the seam to make it nice and smooth. Once your happy, now we are going to make this disposable cup be able to survive a 65mph trip down the highway!
If you intend on using the cup holder/condom/anything else, now is a good time to try it on the cup and make any repairs/fixes. Mine had a open edge, and to prevent it catching wind, I hot glued the seam to make it nice and smooth. Once your happy, now we are going to make this disposable cup be able to survive a 65mph trip down the highway!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
