Introduction: Roundy-speaker

Picture of Roundy-speaker

My first batterypowered diy bt-speaker. Made it from old mahogany tabletop. Speakers and crossovers I took from Psb Alpha speakers I had laying around. Amp unit is 2x50W TPA3116 from ebay and battery is 6s 3000mAh li-po.

First I made me a wooden lathe and used old corded drill as motor. This project was my first lathe experience and thats something Im looking forward to doing again in future diy projects.

Step 1:

Picture of


DIY Hacks and How Tos (author)2016-11-13

That looks really cool. Could you share a little more about how you made the housing?

My materialboard was 29mm thick and I saw rough circles out of it. Then I glued them together. Middlepart for electronics I made same way, only squareshape. Finishing I made with furnitureoil.

About This Instructable




More by Thompsonic:Roundy-speaker
Add instructable to: