Introduction: Rubber Band Bracelet Without Loom

Picture of Rubber Band Bracelet Without Loom

This is my first intractable so please comment and tell me of it worked

Step 1: How to Make a Rubber Band Bracelet Without Loom

Picture of How to Make a Rubber Band Bracelet Without Loom

Rubber bands
S or C clip

Step 2:

Picture of

Put a rubber band on your finger and twist it like an eight then put two more on top of the first one.Do not twist the last two!

Step 3:

Picture of

Then grab the bottom one like in the picture
It should look like the picture when your done

Step 4:

Picture of

Put another rubber band on top of the other ones.
Then keep doing that until it is long enough

Step 5:

Picture of

When it is long enough take the bottom rubber band and pull it over the top one like in the first picture.Once the bottom one is looped over the top two take the new bottom one and loop it over by the other top one like in the second picture.

Step 6:

Picture of

Put your S or C clip on the end like the first picture.
Then put the clip on the other end like the second picture


GooberF (author)2016-07-23

It didn't work for me this is what I got

jmintuck (author)2014-06-17

Have only One Quid alone and going to 99Pence store? Does it have a baggie of Loom elastic bands and no loom to go with it? No problem. Also, in a secure facility where they may not allow tools, possibly, a different scenario, such as hospitals and jails? You can do this as well without tools, even!

Just don't use the hook and think finger pinching the band at the bottom of the stack as you go along and you can do this with no quid for anything else included!

ijean1 (author)2014-01-20

You have to be a certain age to do it

beecroft (author)ijean12014-02-15

What's the age?

tootsie902 (author)2014-01-18

How come in ur bio it says "I'm 11" but under age it says 17

About This Instructable




Bio: I am 11 and I go to Lrcs and am in 6th grade.I like to draw and play with guns and knives.I am ... More »
More by ijean1:Rubber Band Bracelet Without Loom
Add instructable to: