Print PDF
Favorite
Email
Step 2Add the Popsicle sticks to the Tin
To hot glue them:
(1st Picture)
Add some hot glue from the end to about 2 in on one side of one of the popsicle sticks
(2nd Picture)
Stick the popsicle stick to the side of the Altoids tin.
(3rd Picture)
Repeat on the other side.
To use a rubber band:
Set the Popsicle sticks so they overlap the end of the tin by about 2 1/2 in.
(5th Picture)
Use the rubber band to the Popsicle sticks on.
(1st Picture)
Add some hot glue from the end to about 2 in on one side of one of the popsicle sticks
(2nd Picture)
Stick the popsicle stick to the side of the Altoids tin.
(3rd Picture)
Repeat on the other side.
To use a rubber band:
Set the Popsicle sticks so they overlap the end of the tin by about 2 1/2 in.
(5th Picture)
Use the rubber band to the Popsicle sticks on.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jun 3, 2011. 4:38 AMmaker man 101
says:
you skipped number 4 on the pics on step 2. not being mean but lol
Reply
 |
Add Comment
|
