Rubber Band Toy Gun

634

20

0

Published

Introduction: Rubber Band Toy Gun

This is a youtube video of a test and how to build it!

youtube

Step 1: Material

for this build you will need

-a 3/4 inch piece of wood

-a wooden rod

-chlotes pin

-jigsaw

-drill

-glue

Step 2: The Body

In the first place draw and cut the shape of the gun

Step 3: The Barrel

For the barrel take the same angle as on the body(shown on the picture) and cut the barrel so that it measures approximately 8 inch. Also make a small cut for the rubber.

Step 4:

Now it is time to glue allparts together as shown on the picture. You can add nail to make sure the barrel stay in position.

Step 5: Customize

Now the rubber band gun is ready to use!! You can make biger gun and customize it as you want to make it longer and even with two barrels.

Share

    Recommendations

    • Woodworking Contest

      Woodworking Contest
    • Make it Move Contest

      Make it Move Contest
    • Casting Contest

      Casting Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    Comments